63 recalls from July 6, 2026 to July 12, 2026. Urgent ones come first.
The strap in front of the ear may slide backwards, which could affect how steady the helmet sits and how well it holds on the head, and in an accident this may lead to injuries.
The toy has a long cord made from elastic material that can be stretched a lot, so a child could swing it around the head and twist it around the neck, causing strangulation.
The metal parts you can touch are not correctly earthed, so a user can reach live parts and receive an electric shock, and the product does not meet the Low Voltage Directive.
The baby wrap made of fabric comes without instructions for use, so a child may not be properly secured, with a risk of falling and being injured.
The outer casing gets very hot with no warning, and the metal parts and power cable are not earthed, so users could get burns or an electric shock.
The baby carrier comes without instructions for use, so a child may not be properly secured and could fall and be injured, and it does not comply with the General Product Safety Regulation.
The connector hood may come off after frequent assembly and disassembly, so live parts could be touched and cause an electric shock, and the power cable may overheat and cause a fire.
The insulation is insufficient, so metal parts such as the drill chuck may become live and the user could touch them and receive an electric shock.
The costume's fabric is highly flammable and may catch fire if worn close to an ignition source, causing burns, and the product does not meet the requirements of the Toy Safety Directive.
The electric metallic coffee pot overflows during normal use when filled following the instructions, which can burn the user, and it does not meet the requirements of the Low Voltage Directive.
The toy has a protruding part that is too long, so small children may put it in the mouth and choke, and it does not meet the Toy Safety Directive or the European standard EN 71-1.
A software error may make the pedals reverse direction while the user is riding the bike, which could lead to injuries.
The brown rabbit soft toy has small parts, such as the left eye, that may easily detach, and small children may put them in the mouth and choke.
The fabric baby carrier comes without instructions, so a child may not be properly secured, with a risk of falling from incorrect positioning of the child or incorrect adjustment of the product.
The device has a malfunction that could stop it sending a signal and finding a buried victim in an avalanche, which could lead to injuries, and it does not meet the Radio Equipment Directive requirements.
Some parts of the kettle's base are not properly insulated from live parts, and its plastic casing might easily break on impact, so a user can reach live parts and get an electric shock.
After several washes the adjustment ring can slide on the fabric so the baby may fall out, and with no washing instructions the fabric may stop letting air through, which risks suffocation.
The fabric baby carrier comes without instructions, so a child may not be properly secured and could fall because of wrong positioning or wrong adjustment, and it does not comply with the General Product Safety Regulation.
The baby carrier has no instructions, so a child may not be properly secured and could fall if placed or adjusted incorrectly.
The extension lead has no protective earth conductor and its USB charger is not adequately insulated, so a user could touch live parts and get an electric shock.
The adaptor lacks adequate insulation so users can reach live parts and get an electric shock, and insulation distances on the printed circuit board are insufficient, which might cause overheating or fire.
The socket box and connector's socket base may let users reach live parts, the conductors lack enough insulation, cables may come loose, and the product is not protected against moisture, risking fire or electric shock.
The toy comes with loose, unmounted suction cups that are small parts, and a small child may put them in the mouth and choke, and it does not meet the Toy Safety Directive or European Standard EN 71-1.
The adaptor has inadequate spacing between its circuits, so users could touch live parts and get an electric shock, and its circuit board may overheat and ignite, causing a fire.
Because of an error in the DC voltage automatic range selector, the multimeter display shows too low a voltage, so a user may touch high-voltage parts and get an electric shock.
The cable is not properly anchored, the wires have poor insulation and the plug can be partly inserted with a live pin exposed, so a user could touch live parts and get an electric shock.
The coffee pot could overflow its content during use, which could burn the user, and it does not meet the requirements of the Low Voltage Directive.
The 100W LED projector for outdoor use has weak protection against water and moisture and poor insulation, so a user may reach live parts and get an electric shock.
The battery compartment can be easily opened, so a child may put the batteries in the mouth, and swallowing them could damage the child's gastrointestinal tract.
The top and bottom eyelets were not properly crimped, so the wire cable can detach from them and the safety belt would not hold the passenger, who could be injured.
The plug and socket design and weak wire insulation could leave live parts exposed, so a person could touch them and get an electric shock.
The extension lead does not provide adequate earthing protection, so under fault conditions accessible parts could become live and a user could touch them and receive an electric shock.
The power supply housing is not strong enough, so a user could touch accessible live parts and get an electric shock, and the lamp does not meet the Low Voltage Directive or EN 60598.
The lamp has poor moisture protection and insulation, so a user can get an electric shock, and it does not meet the Low Voltage Directive or the European standard EN 60598-2-11.
The cable is not properly anchored and the accessible wires have inadequate insulation, so a user could touch accessible live parts and receive an electric shock.
The white USB mains charger with three USB-A output ports is not adequately insulated between the mains voltage connection points and the USB connection points, so the user may receive an electric shock.
The charger is not adequately insulated between the mains voltage connection points and the USB connection points, so the user may receive an electric shock.
The battery controller may wrongly detect problems, so the car can switch to fail-safe mode while driving, limiting engine power and possibly causing a loss of engine power and propulsion, which raises the risk of accidents.
A retaining ring in the Power Transfer Unit may be incorrectly fitted, which may cause an unexpected loss of traction and/or failure of the parking function, raising the risk of an accident and injury.
The toy has 20 small magnets with high magnetic flux, and if a child swallows them they could attract one another and cause intestinal blockage or perforation.
According to its label, the product contains a psychoactive cannabinoid (Hexahydrozepine), which is associated with the risk of mental and behavioural disorders, and it does not comply with the General Product Safety Regulation.
The label says the product contains a psychoactive cannabinoid (T8HC), which is associated with the risk of mental and behavioural disorders, and the product does not comply with the General Product Safety Regulation.
A baby using the self-feeding bottle cannot control the flow of bottle feed, know when to stop feeding, or signal if they gag or choke, which can lead to choking.
The plastic of this printed face sticker has too much of the phthalates DEHP and DBP, which may harm children's health by possibly damaging their reproductive system, and it does not meet Toy Safety Directive requirements.
The supplied plug is the wrong size, has no space for a fuse needed for safe use if a fault occurs, and the adaptor's earth pin is not sufficient, so the adaptor or plug could catch fire or explode.
Because of incorrect mains electrical coupling, the water pump can give the user an electric shock, and it does not meet the Low Voltage Directive or European standards EN 60335-1 and EN 60335-2.
Because of incorrect mains electrical coupling, the pump can give the user an electric shock, and it does not meet the Low Voltage Directive or the European standards EN 60335-1 and EN 60335-2.
Because of incorrect mains electrical coupling, the hot water circulation pump can give the user an electric shock, and it does not meet the Low Voltage Directive or European standards EN 60335-1 and EN 60335-2.
The gaps between the primary and secondary circuits are too small, so a user could touch live parts and get an electric shock, and the charger does not meet Low Voltage Directive requirements.
The bolts or rivets holding the chains to the flail-cutter could break, so the chains might come off during use and hit the user, causing injuries.
Live parts can be touched when the two plates are open, and gaps inside are too small to stop current leaking, so a user could receive an electric shock.
The pillow may lead to suffocation when used in a sleep space for babies, because pillows and soft toys raise the risk of overheating and airway obstruction, linked to sudden infant death syndrome (SIDS).
The battery management system has no device that monitors cell temperature, so the product could overheat, which could cause burns or lead to a fire.
The pink toy doll pushchair with doll has a poor locking mechanism and is not strong enough under load, so it may collapse and cause falls, trapped or crushed fingers, cuts or abrasions.
The refillable novelty lighter shaped like a playing card is appealing to children because of its shape and colour, who could play with it and suffer burns or cause a fire.
Because of its shape and colour, the refillable lighter is appealing to children, who could play with it and suffer burns or cause a fire, and it does not meet the General Product Safety Regulation or EN 13869.
The strength and effectiveness of the helmet's retention system are inadequate, so in an impact users may suffer head injuries, and it does not meet the PPE Regulation or European standard EN 1087.
The toilet-shaped refillable lighter with a built-in ashtray looks appealing to children, who could play with it and suffer burns or cause a fire, and it does not meet the General Product Safety Regulation or EN 13869.
The refillable lighter looks like a black ace of spades playing card, so children may find it appealing, play with it and suffer burns or cause a fire, and it does not meet the General Product Safety Regulation or EN 13869.
The toy's bag is non-permeable, its opening is too big and it has drawstrings, so if a child tightens them the material can cover the mouth and nose and cause suffocation.
The plug adaptor supplied with the bicycle does not fit the socket securely, has no space for a fuse and has an earth pin that is not solid, so the adaptor or plug could overheat, catch fire or explode.
The product contains a psychoactive cannabinoid (MDMB-PINACA), which acts on the central nervous system and is linked to acute intoxication, impaired consciousness, mental and behavioral disorders, and neurological and cardiovascular effects.
The 1g herbal product for smoking contains a psychoactive cannabinoid (MDMB-PINACA), which can cause serious toxic effects, including acute intoxication, impaired consciousness and mental and behavioral disorders.
The crochet mermaid costume has cords near the neck that can get trapped and cause injury or strangulation, and a white bead on the flower can come off and be swallowed by a small child.
