79 recalls from September 7, 2026 to September 13, 2026. Urgent ones come first.
The rear brake caliper may become overloaded and break, which could lead to accidents and injuries, and the motorcycle does not comply with the regulation on approval and market surveillance of two- or three-wheel vehicles and quadricycles.
The powdered hair dye contains p-phenylenediamine (PPD) at 3.4% by weight without coupler substances, which can cause allergic contact dermatitis, and it does not comply with the Cosmetic Products Regulation.
The diesel particulate filter may be cracked on 2.0 l EcoBlue Diesel and 1.5 l EcoBlue vehicles, so soot in the exhaust may be above the allowed limit and the cars could fail the legally required roadworthiness test.
The charger lacks adequate insulation between its primary and secondary circuits, so the secondary circuit and the connected cable can become live and the user may get an electric shock.
The rear passenger window trim is not properly secured and may detach while the vehicle is moving and fall onto the road, which raises the risk of accidents and injuries.
The front seat belt snap-on anchor may become misaligned or come loose, which could raise the risk of injuries if an accident occurs.
The kettle's electrical connections may overheat and melt the insulating material, leaving live parts open to touch, so a user could get an electric shock, and it does not meet required standards.
Inside parts are not properly attached and may touch the metal casing, the wires are not well insulated and can tear, and the casing is weak, so a user could reach live parts and get an electric shock.
Because the panoramic roof is not bonded well enough, it may detach and fall onto the road, which risks an accident and injuries.
The gaps in the gate are large enough for a small child to slide through and become trapped, which risks suffocation, and the gate does not meet the General Product Safety Regulation or the European standard EN 1930.
The charger lacks adequate insulation between its primary and secondary circuits, so the secondary circuit and the connected cable can become live and the user may receive an electric shock.
The charger lacks adequate insulation between the primary and secondary circuits, so the connected cable can become live and the user may receive an electric shock.
Because of its size and form, the teething toy can reach too far into a child's mouth and cause choking and airway blockage, and it does not meet the Toy Safety Directive or European standard EN 71-1.
The set of 216 small magnetic balls has strong magnets that could attract one another if a child swallows them, causing intestinal blockage or perforation, and it does not meet toy safety requirements.
The charger lacks enough insulation between its inner circuits, so its USB ports can become live and a user may get an electric shock.
Earthed appliances can be plugged in without an earth connection, leaving accessible metal live parts, and a live pin can be touched while inserting a plug, so the user may get an electric shock.
The charger lacks adequate insulation between the primary and secondary circuits, so the USB ports can become live and the user may receive an electric shock.
The front steerer tube can wear out early and fracture, break or open during use, so the rider may lose control of the bike and be injured.
Affected 12V batteries give off too much gas, and with no vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, risking injuries.
The pack of two decorative crab-shaped hairclips has an excessive concentration of benzene, which the notice says causes cancer, and it does not comply with the REACH Regulation.
The rear brake calliper may become overloaded and break, which could lead to an accident and injuries, and the motorcycle does not comply with the regulation on approval and market surveillance of two- or three-wheel vehicles.
The packaging is not childproof, so children can reach the batteries, which could cause choking or harm the digestive tract if swallowed.
The product lacks adequate insulation, leaving accessible live parts of the secondary USB output and the connected device, so the user may receive an electric shock.
The charger lacks proper insulation between its inside circuits, so the secondary circuit and the connected cable can become live and the user may get an electric shock.
The toy has small parts, including the green plastic pipe connection, that can easily detach, and small children may put them in the mouth and choke.
The toy has small suction cups that can easily detach, small children could put them in the mouth and choke, and it does not meet the Toy Safety Directive or EN 71-1.
Long cords with free ends in the neck area could become trapped during a child's activities and lead to strangulation, and the costume does not meet the Toy Safety Directive or EN 71-1 and EN 14682.
The glue contains cyanoacrylates that can bond skin and eyes in seconds, but it lacks the required warnings and hazard labels and child-resistant fastening, so users are not properly told the dangers.
The toy's battery compartment opens easily without tools, so a small child could swallow the button batteries, which could damage the gastrointestinal tract or cause choking.
The toy's battery compartment opens easily without tools, so a small child could put the batteries in their mouth, and the battery may release electrolyte that can be ingested and damage the child's digestive system.
The mask's total filtration capacity is too low, measured as low as 42%, so it may not properly protect and does not meet the Personal Protective Equipment Regulation or European standard EN 149.
The battery compartment opens easily without tools, so a small child could put the batteries in the mouth and the battery may release electrolyte that can damage the child's digestive system.
The packaging is not childproof, so children can easily reach the button batteries, may put them in the mouth and choke, and could suffer damage to the gastrointestinal tract if they swallow them.
The charger lacks adequate insulation between its primary and secondary circuits, so the secondary circuit and the connected cable can become live and the user may get an electric shock.
Small pieces of wood can easily come off the toy, and small children may put them in the mouth and choke, while sharp points on the pieces could cause injuries.
The torch's battery management system lacks a cell temperature monitoring device, so the product can overheat and cause burns, and it does not comply with the General Product Safety Regulation or European standard EN 62133-2.
The hair cream contains formaldehyde, which is prohibited in cosmetics, can trigger allergic reactions and may cause cancer, so the product does not comply with the Cosmetic Products Regulation.
The 50ml eau de parfum spray contains benzyl salicylate that is not shown in its list of ingredients, so people may not know it is there and could have allergic reactions or skin sensitisation.
The product holds 20 ml of nicotine-containing liquid, too much, which could lead to accidental consumption of a high dose of nicotine, which is acutely toxic if swallowed or if it touches the skin.
The product holds too much nicotine-containing liquid (30 ml), which could lead to accidentally taking a high dose of nicotine, and it does not meet the Tobacco Products Directive.
The product holds more nicotine-containing liquid than allowed (declared value: 4 ml), which could lead to accidentally taking a high dose of nicotine, which is acutely toxic if it touches the skin or is ingested.
The Insta O Pro Lemon Lime 20mg/ml holds 12 ml of nicotine-containing liquid, too much, which could lead to accidental intake of a high dose of nicotine, which is acutely toxic if swallowed or on skin.
The product holds 8 ml of nicotine-containing liquid, which is too much, and this could lead to someone accidentally taking a high dose of nicotine, which is acutely toxic if it touches the skin or is swallowed.
The product is highly alkaline and can cause serious eye damage, but it lacks the required warnings and hazard labels, so users are not properly informed about the dangers to skin and eyes.
The liquid is extremely acid and can cause severe skin corrosion and eye damage, but its label is wrong and lacks the right warning pictograms, so users are not properly told the dangers.
The opening of the direct pedal-driven wheel is too large, so a child could put fingers or other body parts into it and be injured, and the tricycle does not meet the Toy Safety Directive or EN 71-1.
The 100 ml eau de cologne lists 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products and may harm the reproductive system and an unborn child, and may cause skin sensitisation.
The solders in the clipper contain too much lead, which poses a risk to the environment, and its plastic has too much DEHP and DBP, which may harm health by possibly damaging the reproductive system.
The suction cups on this plastic toy gun set can easily come off, and small children could put them in the mouth and choke, and the toy does not meet the Toy Safety Directive or European Standard EN 71-1.
The laser beam is too powerful (measured up to 3.62 mW) and the projector is not properly labelled, so looking straight at the beam could damage sight.
The laser beam is too powerful, measured at up to 2.02 mW, and the projector is not properly labelled, so looking straight at the beam could damage sight.
The charger lacks adequate insulation between its primary and secondary circuits, so the secondary circuit and the connected cable can become live and the user may receive an electric shock.
The laser beam is too powerful, measured at up to 6.75 mW, and the projector is not properly labelled, so looking straight at the beam could damage sight.
The toy gun set has small balls, and its suction cups can easily detach, so a small child may put them in the mouth and choke, and it does not meet the Toy Safety Directive or EN 71-1.
The solders in the set with metal miniatures and scoop contain too much lead, measured at up to 87% by weight, which poses a risk to the environment and breaks the ROHS 2 Directive rules.
The charger lacks adequate insulation between its primary and secondary circuits, so the secondary circuit and the connected cable can become live and the user may receive an electric shock.
The squeeze toy, a bun sold in sets of 3, can easily ignite if exposed to a flame and burns quickly and completely, which risks burns, and it does not meet the Toy Safety Directive or EN 71-2.
The seams of the brown and white mushroom soft toy are weak, so the fibrous stuffing is easy to reach and a small child could put it in the mouth and choke.
The solders in the Ulanzi Magnetic selfie light (Smartphone magsafe selfie flip light) contain too much lead, up to 60 % by weight, which poses a risk to the environment and breaks the RoHS 2 Directive.
The toy's eyes may easily detach and its fibrous stuffing is easily reached through weak seams, so a small child could put them in the mouth and choke.
A small piece of the pink dumpling can easily come off the toy, and a small child may put it in the mouth and choke, because it does not meet the Toy Safety Directive or European standard EN 71-1.
The solders in the wireless mouse with USB charging cable have too much lead, up to 39.5% by weight, which poses a risk to the environment and breaks the RoHS 2 Directive rules.
The charger lacks adequate insulation between its main and secondary circuits, so its USB-C ports can become live under mains voltage and the user may receive an electric shock.
The charger lacks proper insulation between its inner circuits, so the cable connected to it can become live and the user may get an electric shock.
The charger lacks adequate insulation between its primary and secondary circuits, so the USB port can become live and the user may receive an electric shock.
The blue angle grinder comes with a toothed saw blade attachment that can strike an object and force the product backwards towards the user, which could lead to injuries.
The charger lacks enough insulation between its main and secondary circuits, so the USB ports can become live under mains voltage and the user may receive an electric shock.
The product has too much formaldehyde (measured value: 0.02%), which is a skin sensitiser that can trigger allergic reactions and may cause cancer, and it does not comply with the REACH Regulation.
The beads expand when they touch water, so if a child puts them in the mouth or swallows them, saliva or stomach liquids can make them swell and block the airway or the intestines.
The ends of the arches on the playmat with electronic button toys are small and stick out enough for a small child to put in the mouth and choke, and it does not meet the Toy Safety Directive.
The blue 30 ml tattoo ink contains too much lead, which is harmful and builds up in the body, plus nickel, chromium VI and methylisothiazolinone, which are banned in tattoo inks and can cause allergic reactions.
A child may turn the wheel by hand while the toy is upside down and trap a finger in the gap between the wheel and the metal part on top, and the toy does not meet the Toy Safety Directive or EN 71-1.
The toy has small leather medallions that can easily come off, and a small child could put them in their mouth and choke, and the set does not meet the Toy Safety Directive or European standard EN 71-1.
Poor insulation means a user can get an electric shock from easily reached live parts, and the product may overheat and cause a fire.
The charger lacks proper insulation between its internal circuits, so the USB ports can become live under mains voltage and the user may receive an electric shock.
The toy's battery compartment opens easily without tools, so a small child could reach the button batteries, swallow them or choke, which could damage the child's gastrointestinal tract.
The black charger with three USB-A ports lacks adequate insulation between its primary and secondary circuits, so the secondary circuit and connected cable can become live and give the user an electric shock.
The disposable electronic cigarette with nicotine has no child-resistant fastening, and nicotine is acutely toxic if it touches the skin or is swallowed, so it is a chemical risk to children.
The charger lacks proper insulation between its inner circuits, so the secondary circuit and the connected cable can become live and the user may get an electric shock.
The connecting rods for the front upper ball joints did not get enough hardening in manufacturing and may break, which could impair the steering, drop fragments on the road and raise the risk of accidents and injuries.
The laser beam is too powerful (measured up to 2.78 mW) and the product is not properly labelled, so looking straight at the beam could cause damage to sight.
